Prefabricated sheds

They are prefabricated buildings made through using two manufacturing systems:

  • For panels, on-site assembly is required.
  • Monoblocs allow equipment to be put together at the factory.

They are used for multiple uses and permit housing electronic, telephone, radio, environmental and pollution control equipment as well as pumps, generators, and other types of installation.

Prefabricated sheds
Prefabricated sheds
Prefabricated sheds

Panelled sheds are manufactured by parts that allow them to be adjusted based on project needs. We can make interior pigeon-holes, various roof slopes, dimensions, doors, windows, gratings, cable pass through holes, etc.

The monobloc manufacturing system has weight limitations and dimensions that are motivated by transport requirements. We have standardised the following models: 2.50 x 2.20 m, 3.70 x 2.20 m, 5.00 x 2, 20 m, 1.80 m and 1.00 x 1.80 x 1.00 m.

The great advantage of this monobloc system is being able to complete and assemble equipment at the factory and take them to the site fully finished.

Both systems, monobloc and panelled, are manufactured with thermal insulation in order to attain a stable range of temperatures that permit teams to work better.

In addition, electro-welded truss girders are made by forming a Faraday cage.

Prefabricated sheds
Prefabricated sheds
Prefabricated sheds

Taking into account that the slab is supplied pre-fabricated, soil preparation is simply a level sand bed or concrete slab.

Various European regulations are applicable to these prefabricated sheds:

  • UNE-EN 14992 corresponding to cladding panels
  • UNE-EN 13224 corresponding to roof elements

Adhorna complies with these regulations and has proper EC markings for its various factories.

EC Marked

Products Calaf Valladolid Lugo Subillabide
LINEAR STRUCTURAL ELEMENTS
*Pillar 0099/CPR/A87/0237
UNE-EN 13225:2005/AC:2007
0099/CPR/A87/0521
UNE-EN 13225:2005/AC:2007
*Beam/Girder
*Inverted T type footing
* Reinforced concrete footing
BRIDGE ELEMENTS
* Prefabricated slab 0099/CPR/A87/0238
UNE-EN 15050:2008 + A1:2012
0099/CPR/A87/0236
UNE-EN 15050:2008 + A1:2012
* Bridge stirrups
* Biarticulated arches
* Tri-articulated arches
* Gable ribbed, solid
* Ribbed pier caps, lightweight, solid
WALL ELEMENTS
* Non-load bearing wall (Panel) 0099/CPR/A87/0242
UNE-EN 14992:2008
0099/CPR/A87/0243
UNE-EN 14992:2008
* Non-load bearing wall (Panel)
* Wall (Panel) solid
* Wall (Panel) with insulation
RETAINING WALL ELEMENTS
*Buttress walls 0099/CPR/A87/0395
UNE-EN 15258:2009
0099/CPR/A87/0397
UNE-EN 15258:2009
*Cantilevered Walls
*L walls
RIBBED FLOOR ELEMENTS
* Ribbed roof, Inverted "P" type 0099/CPR/A87/0538
UNE-EN 13224:2012
0099/CPR/A87/0520
UNE-EN 13224:2012
*Ribbed roof, lightened, gabled
* Ribbed roof, lightweight, prismatic
*Solid roof, "gable or shed"
HV CONCRETE POLES FOR POWER
LINES AND HVH, FLAGPOLES AND POSTS
0099/CPR/A87/0107
UNE-EN 12843.2005
0099/CPR/A87/0108
UNE-EN 12843:2005
GFRP COLUMNS (FIBRE REINFORCED
POLYMER COMPOSITE)
0099/CPR/A55/0079
UNE-EN 40-7:2003